Drill Rods SPT For Site Investigation
Drill Rods SPT For Site Investigation
Roschen group limited have designed and manufactured a circular section Drill Rod for special applications, they are ideal for use in Standard Penetration Testing Operations. Our newly designed circular Rod fulfills the requirements of British Standards BS 1377: Part: 1990.
With the S.P.T Drill Rod tapered thread design and friction welded construction it provides maximum stiffness and a more rigid threaded joint coupled with reliability, durability and optimum field performance. The tube element is manufactured from cold drawn seamless steel tubing and the end pieces from heat treated alloy steel.
Advantages Of Taper Threaded S.P.T Drill Rods
. Stronger then parallel threading due to maximum threaded material disposition under critical area of pin thread
. Easier and faster to make and break joints than with parallel threaded Rod
. Less chance of thread gauling
. Spanner flats for safer Rod breaking
. More rigid threaded joint than parallel BW Rods
. Less chance of “Cross threading”
. Reduced chance of box thread belling
. Dual purpose means it can be used for some rotary drilling operations
Technical Specification
| Outside Diameter | 2 3/8in. 60.3mm |
| Straightness | 1: 1200 (Better than BS 1377 Requirements) |
| Spanner Flats | 1 7/8in. A/F. (47.6mm) Both Ends |
| Stiffness | Better than BW Rod to BS 4019 |
| Weight | Less than 9kg / Metre |
| Material Properties | ||
| Tensile Strength | 620 N/mm² | 700 N/mm² |
| Yield Stress | 525 N/mm² | 495 N/mm² |
| Elongation | 12% | 15% |
| The above material specification complies with the requirements of BS 4019: Parts 3 & 4 and ISO 3551: 1992 | ||
| Part numbers | |
| 3 Metres | RS 05470 |
| 1.5 Metres | RS 05471 |
| 0.75 Metres | RS 05472 |
| 0.50 Metres | RS 05473 |
| If you require any further information or a bespoke design then please email or contact us. | |
