DRILL PIPE, HAMMERS, BITS, CASING HAMMERS, GROUTERS, SONIC HEAD AND ACCESSORIES

DRILL PIPE, HAMMERS, BITS, CASING HAMMERS, GROUTERS, SONIC HEAD AND ACCESSORIES

 

FOSTER TYPE RECONDITION TUBING TONGS  (Ref#6193T)  with new air back up tool, 2-3/8" and 2-7/8" jaw set, puts up 6000 fps of torque in low gear @ 2000 psi and 1300 fps in high gear @ 2000 psi  Price:  $18,500

BJ TYPE B TONGS (Ref#2181Rd)  w/jaws for 5" – 6-3/4", 6-5/8 – 9", 9" – 10-3/4"  POR

DOWN HOLE DRILL ACCESSORIES  (Ref#11501T) – Prices on Request
EDM THUNDER 8 STD HAMMER, complete with 4-1/2" Reg thread top sub, pin up, placed in serv ice 2009, approx. 7000' or less, well oiled, very good condition with 8-3/4" bit
EDM 6" QL STYLE HAMMER, getting thin but still drilling
STABILIZER, ADAPTERS, FISHING TOOSL, SUBS
Adapter 4-1/2" OD, 2-7/8 IF box to 3-1/2 Reg gox, 32" long
Bit sub 30" long 3-1/2 x 3-1/2 Reg box to pin up
Box up reverse overshot for 4-1/2" drill pipe, 2-7/8 IF box up
Pin up forward overshot for 4-1/2" drill pipe, 3-1/2 Reg pin up
BITS, HOLE OPENER, ETC
Kennametal Kensclaw (Mills Machine Co) 8 cutter 8-3/4 OD, 4-1/2 Reg pin up claw bit, very good, all cutters good and rotating pilot very good condition
Bit sub 4-1/2 OD, 3-1/2 Reg pin up with 5-1/4 carbide insert roller bit for going inside 5-9/16 liner, good condition
Rock Hog 12" OD 6315 Mission shank bit
Rock Hog 10" OD 6315 Mission shank bit
Rock Hog 8 x 10" hole opener 6315 Mission shank bit
Carbide chisel tooth spread 11" soft formation roller, mtd to 6-5/8" box 4-1/2" pin up adapter mtd to 4-1/2" box to 3-1/2" reg pin up adapter, and 1' long stabilizer
WILDEN M8 AIR DIAPHRAGM PUMP  extra set diaphragms
AERMOTOR 66A80 10 HP 6" SUB PUMP Franklin Motor 230 Vac single ph with control box, mfg 1992, used rfor (1) 48 hr pump test
BRAND NEW IN BOX AERMOTOR A+35 SS-500 4" SUB PUMP, complete with Franklin 3 phase 230 VAC motor date code 6, no control box
BRAND NEW REED MODEL R235 48" CHAIN TONG WRENCH 1-1/2" to 8" capacity (used 1 time)
LIKE NEW RIDGID 36" PIPE WRENCH
REMINGTON MODEL 476 POWDER ACTUATED HAND HELD NAIL GUN 22 cal w/extras
RIDGID 60" (broke)
RIDGID 48" COMPLETE PIPE WRENCH, 2 available, good condition (slight bow in handle of one),
RIDGID 36" PIPE WRENCH, older, good condition
SHOP BUILT GEO-THERMAL PURGE PUMP, on cart with Aermotor 1 hp 115 VAC centrifugal high capacity pump, valved for forward/reverse/discharge
RIDGID PIPE THREADERS 12R head with handle and 1, 1-1/4, 1-1/2 and 2" NPT dies, like new and 00-R head with handle and 1/4" die like new.
CME DIAMOND BIT GRINDER, air powered, water cooled, 10,000 rpm
RIDGID #25 VEN YOKE PIPE VISE, very good condition 1/8 to 4"
2 ROCTEST WATER LEVEL METERS 300 and 500' models
2" and 4" inside PVC pipe cutters for monitor well installations
Parts washer, Resolve Industries 30 gal new clean fluid, tub dims 33 x 21 x 8, work light, soaker hose, wet brush
Wilton Model 3575 T 7 x 12" wet metal cutting band saw
Top and bottom of 6 rod carousel (needs tube) and some parts for same

USED HAMMERS AND BITS FOR SALE  (Ref#4127T)
Tricone bits:  from 5-7/8" – 16" butoon bits, 6" – 12-1/4" steel tooth bits, fishing tool bit, collide bits
Subs
Hammers:  12" – 17-1/2" hammers
Hammer Bits:  13" – 17-1/2" hammer bits
(10) 6" x 20' rods
(3) 6" x 20' rods
(13) 6" x 25' rods
(6) 10" x 25' rods
Hole openers
Stabilizers:  8" – 12-1/4"

 

USED TRICONE BITS:  (Ref#329T)
TCI  (Tungston Carbide Insert)
6-1/4'   $1,320
7-7/8"   $1,440
8-1/2" to 8-3/4"    $1,620
9-7/8"  $3,600
10-5/8"   $4,200
12-1/4"   $4,200
17-1/2"   $10,200
Tooth Bits
6-1/4'   $1,200
7-7/8"   $1,440
8-1/2" to 8-3/4"    $1,200
9-7/8"  $1,800
10-5/8"   $1,800
12-1/4"   $2,160
17-1/2"   $5,760

 

(Ref#7607TC) Cable Tools

2 set of 3" jars
2 stems & swabbing tools
elevators
Make offer

CASING JACKS  (ref#3329Tb)  will pull any depth, 3" jaws for drill rods, 4" for steel casing  Price:  $11,500

TOOLING FOR CABLE TOOL RIG  (Ref#9361T)  for 16" – 18" diameter, elevators, tooling, circle jacks POR

Cables tools  (Ref#8264Tc) fishing tools, jars bits, etc.

CABLE TOOLS  (Ref#7360Ta)  
Set of drilling jars 5-1/4", 2-1/4" 3-1/4" threads, Set of fishing jars 5-1/4", 2-1/4" 3-1/4" threads
Wrenches, Pipe cutting tools 2-1/4 x 3-1/4" threads, Drive head
Drive clamps, 5" rope socket
5" x 14' drill stem
10" button bit, 12" button bit, 6" drill bit
Prices on Request

(Ref#10324T)  HD large diameter auger bit, 23" diameter flights  Price:  $2,000

(Ref#6879Ta)  6' bell bucket  Price:  $3,500

(Ref#6879Tb)  24" auger bit with 2-3/4" Kelly bar  Price:  $2,000

(Ref#6879Tc)  7-7/8" rerun tungsten carbide tricone bit  Price:  $1,350

(Ref#2175T)  large diameter augers, 18” up to 8’  POR

(Ref#2258TC) Bit dressing machine, used for forging cable tools  Make offer

(Ref#5653Ra)  35 pcs of 10' HQ rods  Price:  $6,550

(Ref#1130T)  50' of 3-1/4" OD x 5' Geoprobe rod  POR

(Ref#5156T)  10-1/4" hollow stem auger, drilled 3 holes, 1 drive, head and bit  POR

(Ref#5172T)  8-1/4" hollow stem auger, like new, 1 drive head, 1 bit  POR

(Ref#4296Tb)  40' of 8-1/4" CME auger, one bit in good condition and one worn bit, one center bit and 2 drive caps  POR

(Ref#5653Rb)  11 pcs of 6-5/8" hollow stem augers 4-key  Price:  $5,300

(Ref#5567T)  6-1/4" augers, very good condition, two keys, two bolts  POR

(Ref#13485T)  100' of 4-1/4" ID hollow stem augers, 55' of 6-1/4" hollow stem augers  POR

(Ref#5818Td)  80' of 4-1/4 HSA augers purchased from Geoprobe (can be used on CME), excellent condition, hardly used  POR

AUGERS  (Ref#9752Nc)\
MOBILE
3-1/4" augers (21)
Cutterhead
GBonnet
Double flight lead
ACKER
4-1/4" augers (13)
Cutterhead
Bonnet
CME
8-1/4" augers (3)
Cutter head
Bonnet
1-1/8" hex x 5"x5' solid flight augers, cutterhead
1-5/8" hex x 5"x5' solid flight augers, cutterhead

(Ref#9494Td)  55' of 6-1/4" Mobile lock augers POR

(Ref#11369Tb)  50’ of 6-1/4” Hollow Stem Augers, 3 cutting heads, 2 auger caps with 2” hex  POR

(Ref#5652Tb)  18 pcs (90') of 15" OD HSA, near new 10.25 x 5' CME cap and bits  POR

(Ref#5652Tc)  27 pcs (135') of 18" OD HAS, near new 12.25 x 5' CME cap and bits  POR

RODS  (Ref#9752Nd)
AW RODS:  2', 5' and 10'
AWJ RODS:  2', 5', and 10'
NW RODS:  5', 10', split spoon sampler 2' x 24" (new)
NQ-2 RODS:  5', 10',
NQ-2 wireline core barrel, 10' solid inner tube (new), 10' solid inner tube (used), 5' solid inner tube (used)
10' inner tube solid, 5' inner tube solid, 10' inner tube split (bits available)
NWD4, 5' with solid I.T., 5' with split I.T., 10' with solid I.T. (new), 10' head assembly and outer tube, 5' innter tube and out tube (new), bits available

(Ref#14291Tc)   1000' PQ core Rods,  1000' BQ core Rods, NX wireline core rods and barrels  POR

(Ref#7973Tb)  LONGYEAR PWT 10' CASING  Price on Request

MISCELLANEOUS AUGER COMPONENTS, TOOLS AND BITS  (Ref#9752Ne)
P.A.M. conventional core barrel with solid and split I.T. – 5' (bits available)
PVS Plastic pipe (mixed sizes), slope indicator pipe
Bean Pump 420 with 2 cylinder diesel engine
Bean Pump 420 with 2 cylinder gas engine
1 man pumps – 318
New Moyno 3L6 pump
(2) used (newly rebuilt) Moyno 3L6 pumps
Pulling plut, 4" drive casing, pipe wrenches, winches, transmission, 2-3/4 – 9-7/8 roller bits
Austinberg sampler
Continuous sampler for CME 55
Continuous sampler for CME 45C
Diamond core bits A-1 stones, some bits oversized, NQ2, Christenson D4, diamond reaming shell,
Steel water tank for pickup truck (250 gallons)

 

DIEDRICH DRILLING TOOLS  (Ref#3064Tb)
4-1/4 Hollow Stem Augers 15 @ 5', Bolts for HSA (40), 4-1/4" auger holder, 4-1/4" double adapter, 4-1/4" auger head blade bit (3), 4-1/4" auger head finger bit
6-1/4" Hollow Stem Augers 12 @ 5' and 1 @ 3', auger bolts (40), 6-1/4" hex pin box cap, 6-1/4" pilot bit, 6-1/4" auger holder (3), 6-1/4" auger blade bit
2-7/8" AW rods box pin conn 21 @ 5', 4-1/2" AW core barrel for auger, 4-1/4 AW rod bit, 2-7/8 AW rod closed pulley plate, 2-7/8 AW rod open pulley plate, 2-3/4" AW water swivel, 2-3/5 AW rod drag bit, AW pin connect swivel, 4-1/4" AW rod solid bit, 2-7/8 AW rod cap adapter
3" Shelby Tube Head, 3" Shelby Tubes (44), 3" extruder holder, 2" split spoon sampler 4 @ 2', 2" AW head for sampler, 2" threaded shoe end (2)
3-1/2" Solid Flight Auger 12 @ 5', 1-1/8" hex pin to box conn, 3-1/2" auger holder (3), 3-1/2" U pins for augers (20), 4-1/2" auger bit

(Ref#5623T)  (6) 4-1/2" x 5" HAS, (1) 4-1/4" Cutter Head, 140# AWG hammer, split spoon and connections  Price:  $6,500

(Ref#15489R) Diedrich 6 1/4 ID hollow stem augers, 50' with center plug, barely used, like new condition  POR

(Ref#5790R) Mobile 3-key hollow stem augers, 55' of 6 1/4" ID x 5' HSA 50%, 100' of 3 1/4" ID x 5' HSA 50%POR

EXTENSIVE TOOLING AND PARTS FOR AUGER RIGS  (Ref#6149Td)

ROCK AUGERS  (Ref#9280Rf)  Manufactured by Jeffrey Machine, 1800mm auger  Price:  $17,500

ROCK AUGERS  (ref#9280Rg)  Manufactured by Jeffrey Machine, 2200mm auger  Price:  $19,500

NEW RAISE BORE DI22 PIPE  (Ref#14065R)  High strength (AISI 4330 steel) or standard strength (AISI 4145 steel), Integral raise pipe, 10" OD x 60" S-S length with 8-1/4" DI22, connections, with QITH high impact thread protectors, Robbins, Dresser or Subterranean wrench squares 750#/340 kg weight per pipe  POR

NEW DRILL PIPE MADE IN USA   (Ref#14779N)
3-1/2" OD x .368W x 20' x 2-3/8 IF (3.5" OD tool joint x 1.75" ID tool joint) Ingersoll Rand TH60/T3W flats, inertia welded drill pipe  
4-1/2" OD x .337w x 20' x 2-7/8 IF (4.5" OD tool joint x 2.125" ID tool joint), T3/TH60 (cyclone) flats, inertia welded drill pipe  
4-1/2" OD x .337w internal upset x 30' N-80 Grade mid body x 2-7/8 IF (4.5" OD tool joint 2.125" ID tool joint), RD20 / T4 dril pipe  
3-1/2" OD x .368w x IEU x 4.5 M Grade S-135 Ditch Witch/HDD 7020/8020/JT100 (4.0" OD tool joint x 1.49" ID tool joint) New HDD drill pipe 
4-1/2" OD x .337 wall internal upset x 25', S-S N-80 mid body 2-7/8 IF connection 4-1/2" OD tool joint, 2-1/8" ID T-4 pipe compatible with RD20 rig  
4-1/2" OD x .337W x 20', 3-1/2 Reg connection w/12.5" long flat on pin end, 2.25 long flat on box end (box frlat perpendicular to pin flat) Driltech style 
3-1/2" OD x .368w x 20', 2-3/8 IF conn/ w/Driltech flat configuration (box flat perpendicular to pin flat) 
Prices on Request

(Ref#14721TB) 1500' of  4 1/2" used casing  Price on Request

(Ref#14721TC) 3100' of 5 1/2" used casing  Price on Request

(Ref#6389Tb)  1500' of 5" Range 2 casing  POR

(Ref#9830T)  7" casing (240') left hand thread, various lengths, various drive shoes available, used for environmental drilling o a Foremost drill  POR

(Ref#749Re)  10-3/4" Beco drill pipe, 50 joints  Price:  $185,000

(Ref#15358T)  10-3/4" Beco drill pipe – 210' total, 6" thread connection, 10 jts of 20' pipe, (1) 10' joint, comes with breakout wrenches  POR

CASING JACKS AND TRUCK  (Ref#11313T)  Jacks have new seals, 75' 15,000# hydraulic hose to go from jacks to truck, spiders, pipe slips and substructure to go from ground or floor and attachment to bolt jacks to well head, truck and casing jacks all in good working condition  Price:  $132,000 CDN

FOREMOST TOOLING AND ACCESSORIES  (Ref#14205T)  
Angle package for Foremost (Ref#14205Tb)  includes stand which is mounted on trailer, includes 100' sections of hydraulic hoses with bulkhead, mast is removed from rig and mounted on stand and runs side by side with rig.  Allows to drill at 25 degree angle  Price:  $75,000
Casing Jaws (Ref#14205Tc)  20", 13", 10", 8", 7-5/8", 6"  Price:  $950 each
Jaws with Casing Clamp 18", 8", 7-5/8", 7", 6"  Price:  $950 each
7" Left Handed Casing  
(23) 5' pieces – 115' total
(26) 10' pieces – 260' total
(45) 20' pieces – 900' total
(51) 8" x 10'  pieces – 510' total
8" Drill Pipe
(4) 5" pieces
(28) 15' pieces
(2) 10' pieces
Also available:  Discharge head casing adapters (20 different sizes), casing shoes, dual rotary 8" quill, circulating heads.

(Ref#9343T)  16" diverter for Foremost-Barber rig  POR

(Ref#10266Ng)  Washington diverter for Driltech rig  POR

(Ref#15413RA) 200 of 10" drill pipe  Make offer

(Ref#13262T)  50 jts of 8" Reverse Circulation pipe, 20' lengths, Holte 6-5/8" FH thread, like new – some not used  POR

(Ref#749Rd)  7" x 20' Reverse Circulation pipe, screwed ends, manufactured in 2005 and never used, includes bit sub, top drive, sub, pipe spacers and swivel,  50 joints  Price:  $335,000

(Ref#779Nb) Reverse drill pipe, 1800' of 6 5/8" x 20' Hacker pipe  Price:  $130,000

(Ref#10681Tc)  93 joints of 30' aluminum pipe

(Ref#3238T)  840’ 3-1/2” x 12’ aluminum pipe, like new condition  POR

(Ref#10619Td) 1140' new aluminum 4-1/2" pipe $1,400 each rod

(Ref#10619Te)  Used 4-1/2" Aluminum pipe  $675 each rod

(Ref#9696Tb)  1300' of 4-1/2" x 25' aluminum pipe, used on Driltech  POR

(Ref#14101Tb) 1000' of 4" x 20' (2-7/8 IF) aluminum flush joint drill pipe on 2 axle trailer with laydown system Price: $47,500

(Ref#13799R) 400' of 6-5/8" x 20' rods with 4-1/2" pin and box conn,  (200' used, 200' almost new)  POR

(Ref#12440T)  390' of 6" OD x 15' casing, 4" ID, 4TPI parallel thread, 3/8" wall, 380 lbs per piece, used to install 1-1/4" ground loops, good condition  POR

(Ref#1472RB) Used Matrix single tube 7" casing, left hand thread,20' lengths, connections on 6 5/8" OD mid body, 5 ¾" ID, 45 joints available, only used one summer on a Foremost drill, casing turns counter clockwise POR

(Ref#9157R)  BRAND NEW BIG DIAMETER MATRIX REVERSE CIRCULATION PIPE PACKAGE Bought new in 2013 and never used, (20 jts) 11" OD (4" inner tube) x 20' drill pipe with steel thread protectors (total 400') POR

(Ref#9914T)  400' of 3-1/2" (2-3/8IF) Matrix Flo Lite drill pipe (brand new), 420' of 3-1/2" (2-3/8IF) Matrix Geothread pipe with GEFCO flat (almost new)  Price on Request

 (Ref#14583T)  8200' of 4-1/2" X Hole G-105 drill pipe, double white  POR

(Ref#2283Nf)  1400' yellow band, 5" X-hole 31', (4-1/2 IF tool joints)  POR

(Ref#4678R) 15,000' of pipe – some double white band, some yellow/orange, Grade E pipe, most 16.60lb, some 20 lb available
POR

(Ref#15528T)  9,000' of 4" S135 (14#) with 4" full hole hardbanded drill pipe  POR

(Ref#7044T)  2226 jts of used 4-1/2" OD Range 2 drill pipe (4-1/2" XH connections), 16.60# G105
6-1/4" OD, 3" ID internal plastic cloating/hardbanded, DS1 Cat 4 inspection POR

(Ref#10681Td)  1200' of 2-7/8" x 32' pipe

(Ref#7008R)  2,883' of 3-1/2" x 31' drill pipe with 3-1/2" IF (NC38), inspected, Grade S135  POR

(Ref#5079T)  (3) 8-5/8" spiral drill collars and (14) 6" slick drill collars  POR

(Ref#11320TB) drill collars, 6" x 30', new pins (5) available  POR

(Ref#14583T1)  5" collars, 5 available, unused  POR

(ref#14583T2)  6-1/2" spiral collars, 11 available, POR

(Ref#6133Tb)  (1) 12-1/4" x 10'L spiral drill collar, (1) 10-5/8" x 10L spiral drill collar POR

(Ref#11774Tb)  Approximately 1500' of 5" x 30' Range II drill pipe, heavy wall  POR

(Ref#9108R)  4526' of 5" x 30' bottleneck drill pipe with 4-1/2 IF  POR

(Ref#5902N)  used 49 joints 4-1/2" x 30' drill pipe (3-1/2 Reg thread), like new condition, not IR flats $550 each

(Ref#4974R)  1500' of 4-1/2" x 30' pipe (4-1/2" XO box and pin)  POR

(Ref#5902N)  used 49 joints 4-1/2" x 30' drill pipe (3-1/2 Reg thread), like new condition, not IR flats $550 each

(Ref#12594T) Atlas Copco RD-20 drill pipe, 30' x 4 1/2" external flush with 2 7/8" reg, some new, some “like new"  POR

(Ref#9548N)  Atlas Copco drill pipe, used 1-2 times, like new
2500' of 4-1/2" x 30' (2-7/8 IF)
2500' of 4-1/2" x 30' (3-1/2 Reg)
Price:  $700 per joint

(Ref#12628N)  NEW 4-1/2" diameter x 30' length x 2-7/8 IF conn, 8.55 mm for Ingersoll Rand RD20, located Dubai  Price per joint:  $950

(Ref#1513R)  3500' of 4-1/2" x 30' (2-7/8 IF conn) Ingersoll Rand RD20 drill pipe, internal flush (not bottleneck), Texas  POR

(Ref#6835T)  approx. 2700’ of 4” Range II drill pipe with 3-1/2” IF connections, good condition POR

(Ref#4234T)  3,660' of RD20 drill pipe, 30' length, (approximately 70% life left)  POR

(Ref#9981T)  Aluminum drill pipe, 4-1/2" x 30' Range 2, 2-7/8 IF, 9.33 lb per foot  POR

(Ref#8334Rb)  1000' of 4" full hole x 30' drill pipe @ $500 each

(Ref#4818T)  4" x 30' UPSET BOTTLENECK PIPE  approx. 4000', double white band  POR

(Ref#8169R) 700 meters of 3-1/2" x 30' drill pipe

(Ref#8153Nb)  2500' of 3-1/2" x 30' drill pipe, 3-1/2 IF, white band  POR

(Ref#14564Ra) 600+' of 30' joints, pin x box, good condition  Make Offer
(Ref#14564Rb) Mission 6" hammer with float valve  Make Offer

(Ref#6065T)  19 jts of 6-1/2" x 20' Schramm drill pipe (4-1/2 Reg box and pin) like new condition, only used one time  POR

(Ref#12208Rc)  800' of 5-1/2" x 25' flush wall pipe  Price on Request  

(Ref#8828RC)  1000' of 4 1/2" x 25' pipe, (1) 8" IR 380 hammer, (2) 6" IR360 hammers, 2 stabilizers, etc
POR

(Ref#5510RB) Ingersoll Rand 5-1/2" x 25' drill pipe (4" Full Hole),800' available, like new condition, also 6" 9" & 15" drill collars  POR

(Ref#10571R)  800-1000' of IR T4 4-1/2" x 25' drill pipe, 3-1/2" API Reg, pin up, box down  $375 per joint

(Ref#12208Rb)  25 jts (625') of 4-1/2" x 25' Ingersoll Rand T4 drill pipe  Price:  $425 per joint (must sell his Ingersoll Rand T4 rig first)

(Ref#8928R)  250' of Ingersoll Rand 4-1/2" x 25' drill pipe 2-7/8 IF conn, internal flush joint  POR

(Ref#1308T)  15 joints of 4-1/2" x 25' (3-1/2 Reg API) drill pipe, like new condition  POR

(Ref#7778Rg)  5 joints of 4-1/2" x 25' drill pipe (3-1/2 Reg API) POR

(Ref#9814Nb)  6 pieces of new 4-1/2" x 25' (.500" wall) aluminum drill pipe, Driltech D40K, 3-1/2 reg pin x box, manufactured by Star Iron Works Price $1,475

(Ref#4539T)  1000' of 25' drill pipe (used on CP 650), approx. 75%  POR

(Ref#9814Nc) 6 pieces of new 4-1/2" x 25' (.674" wall) heavy steel, Driltech D40K, 3-1/2" reg pin x box, manufactured by Star Iron Works  Price:  $1,510

(Ref#12777Tc) 2000' of 4-1/2" x 25' drill pipe (IF thread flush), good condition  POR

(Ref#10275RB) 30 joints of 4-1/2" x 25' drill pipe, used on a T4  POR

(Ref#869Tc)  1000' of 4-1/2" x 25' CP pipe  POR

(Ref#9119NB) 400' of Ingersoll Rand 4" x 25' drill pipe   POR

(Ref#15363T) approx 800' of 4" x 25' drill pipe  POR

(ref#12777Tb)  2700' of 3-1/2" x 25' drill pipe with IF thread flush, good condition  POR

(Ref#10275RA) 9 joints of 3" x 25' drill pipe with 2 3/8" pin up & box, “like new" condition (used on a T2)  POR

(Ref#1402Tb)  67 joints of 3-1/2 IF, 15.50# drill pipe POR

(Ref#2181Rb)  (15) 6" x approx. 29'L drill collars, wrench flants on pin end  POR
(Ref#2181Rd)  BJ type B tongs w/jaws for 5" – 6-3/4", 6-5/8 – 9", 9" – 10-3/4"  POR

INTERNATIONAL PIPE TRUCK WITH 1700' OF 20' DRILL PIPE  (Ref#7349TA)  Price:  $46,500

(Ref#749Rc)  Foremost drill pipe, 45 joints of 4-1/2" x 20'  Price:  $600 per joint

(Ref#341T)  800' 4-1/2" of 2-7/8 IF x 20' flush wall,16# per foot, manufactured by Heards Machine, vry good condition, never ran in compression  POR

(Ref#14090T)  4-1/2" x 20' core pipe, 75 jts (1500') available  $875 USD per joint

(Ref#1449R)  13 jts of 4-1/2" x 20' T64 pipe  $250 each

(Ref#15096Rb)  14 jts of Ingersoll Rand T3 4-1/2" x 20' (3-1/2 Reg) drill pipe  Price:  $3,500 for all

(Ref#1649T)  70 jts (1400') of 4-1/2" x 20' (3-1/2 Reg) pin down connection T3 drill rods  POR

(Ref#4305Nb)  400' of 4-1/2" x 20' Driltech pipe, 2-7/8" connections  $350 per joint

(Ref#7844T) 30 joints of 4 1/2" x 20' flush joint drill pipe, 3 1/2" API  POR

(Ref#15574N)  3000' of 4-1/2" x 20' drill pipe (2-7/8 IF)

(Ref#1980Ta)  1000’ of 4-1/2” x 20’ Cyclone style drill pipe (2-7/8 IF), Mfg by Star Iron  POR

(Ref#1980Tb)  1000’ of heavy wall 4-1/2” x 20’ drill pipe (22 lb/ft)  POR

(Ref#4148RB) 400' of 4 1/2" x 20' drill pipe, 3 1/2 reg conn, mixed, come CP & IR flats  POR

(Ref#7778RD) approx. 700' of 4 1/2" x 20' flush joint drill pipe with 3 1/2 API reg pin/box   Price on request

(Ref#4214Nc)  500' of 4-1/2" OD x 20' drill pipe, 2-7/8 IF threads, near new condition POR

(Ref#1251Nb)  Drilltech pipe 4-1/2" x 20' (4" conn), 2500' available  POR

(Ref#10266Nf)  1000' of 4-1/2" x 20' Driltech style pipe with 3-1/2 Reg connections

(Ref#13140Tb)  400' of 4-1/2" x 20 (2-7/8 IF), CP pipe, 60%  POR

(Ref#13140Tc) 500' of 4-1/2" x 20' Reichdrill pipe, 60% POR

(Ref#13140Ta)  500' of 4" x 20' (2-7/8 IF) Reichdrill pipe, 65%  POR

(Ref#1251Nc)  Chicago Pneumatic drill pipe 4-1/2" x 20' (4" threads), 2000' available  POR

(Ref#9273R) 1000' of 4 1/2" x 20' drill pipe, 3 1/2 API (used on CP650)  POR

(Ref#8083T)  4-1/2" x 20' Schramm drill pipe (3-/2 Reg), 9 jts (8 bottleneck, 1 reg), POR

(Ref#9481T)  10 jts of 4-1/2" x 20' Schramm drill rod (3-1/2 Reg thread)  POR

(Ref#12086RB) Schramm drill pipe 4 1/2" x 20' with 2 7/8 IF thread, 45 joints available  POR

(Ref#1480Tc)  42 jts of Schramm 4-1/2" x 20' drill pipe (3-1/2" API)  POR

(Ref#14213RB) 300' of Schramm drill pipe, 4 1/2" x 20' (3 1/2") about 50%  POR

(Ref#12896RA) 200' of Schramm 4 1/2" x 20' drill pipe (50-60%)  POR

(Ref#7669T)  50 jts of 4-1/2" x 20' Schramm drill pipe  POR

(Ref#14171T)  500' of underreaming rods, 4-1/2" x 20', like new  POR

(Ref#4472Tb)  560' of 4-1/2" x 20' drill pipe (3-1/2" IF) complete with bits, subs, etc. POR

(Ref#6192T)  500' of 4-1/2" x 20' (3-1/2 Reg API) drill pipe  POR

(Ref#12012R)  16 joints of 4 1/2" x 20' drill pipe (2 7/8" IF), ran on Failing CF15  Price on request
Also available: 1 joint of 15' x 7" OD

(Ref#1123T)  20 joints of new CP 20' rod (3-1/2 Reg threads), never used, still banded  POR

(Ref#6133Tc)  780' (39 pcs) 4" x 20' flush joint drill pipe, straight thread with 3-1/4" hole thru center, good condition  POR

(Ref#7941Ta)  1300' of Chicago Pneumatic 4" x 20' drill pipe  POR

(Ref#838Na)  540' of 4" x 20' drill pipe (3-1/2" conn), flush joints with breakouts Davey threads (used on Davey rig), flats on both ends, 300' like new  POR

(Ref#5797RC) 600' of 4" flush joint x 20' drill pipe POR

(Ref#8334Rb)  760' of 4" full hole x 20' @ $500 each

(Ref#1109Tbc)  1000' of 4" x 10' drill pipe, 20' pipe trailer  POR

(Ref#8334Rb)  2000' of 3-1/2" x 30' drill pipe @ $450 each

1979 FORD 8000 PIPE TRUCK (Ref#10288Ta)  POR
(91 jts) of 3-1/2" x 30' bottleneck drill pipe 3-1/2" IF – aluminum  (Ref#10288Tb) - POR
(10 jts) of 3-1/2" x 30' bottleneck drill pipe 3-1/2" IF – steel  
(8) 5-1/2" drill collars with 3-1/2" IF, subs - (Ref#10288Tc) - POR

1986 FREIGHTLINER PIPE TRUCK  (Ref#10289Tc)
2000' of 4-1/2" x 25' flush joint drill pipe (2-7/8" IF) – excellent shape (Ref#10289Td)
(1) 5-1/2" drill collars
Subs for bits and change overs

(Ref#2283Nd) 25 jts of 4-1/2" x 15' (2-7/8 thread)  POR

(Ref#10183T)  4-1/2" OD x 15' drill pipe with 2-7/8 IF thread, brand new with thread protectors on both ends, 15 joints POR

(Ref#8721Nb)  4-1/2" dia x 15' with 2-7/8 IF (15) excellent condition (8) fair condition

(Ref#6355NB) 7 joints of 4 1/2" x 15' drill pipe, 2 3/8" connection  POR

(Ref#7360T)  20 jts of 4" x 20' (2-7/8 Mayhew Threads) POR

(Ref#3279Ta)  2500' of 3-1/2" x 20' drill pipe, like new condition POR

(Ref#5628T)  approx. 450' of 3-1/2" x 20' drill pipe (3-1/2 IF), good condition and 4" drill collar, used on Failing and Midway rigs  POR

(Ref#5594Tb)  3-1/2" x 20' Schramm bottleneck pipe – 18 jts  POR

(Ref#1985Tb)  400-500' of 3-1/2" x 20' drill pipe POR

(Ref#3499T)  3-1/2" x 20' (2-3/8 FJ), 50%, 10' stabilizier  POR

(Ref#15059Rc)  75 joints of 3-1/2" x 20' drill pipe  POR

(Ref#5797RD) 1000' of 3 1/2" flush joint x 20' drill pipe (not for sale at this time)

(Ref#11648R)  500' of 3-1/2" x 20' drill pipe (2-3/8 IF) flush joint, used on Schramm T450WS  POR

(Ref#10266Ne)  1000' of 3-1/2" x 20' Driltech style pipe with IF connections

(Ref#10948R)  70 jts of 3-1/2" x 20' (2-3/8 IF), 60%, flats on box end  Price:  $275 per joint

(Ref#4815N)  2000' of 3-1/2" x 20' with 3-1/2 IF conn, 4-3/4" tool joints, square shoulder, slots box end, rated at 80% POR

(Ref#6502Rc)  2,100' of 3-1/2" x 20' white band inertia welded IF bottleneck pipe  POR

(Ref#7721T)  2000' of 3-1/2" x 20' flush joint drill pipe with 2-3/8 IF with pin and box qand breakout flates, used on Speedstar 50K  POR

(Ref#8683Tb)  143 jts of 3-1/2" S-135 drill pipe, 13.30#, bottleneck POR

(Ref#7360Tb)  10 jts 3-1/2" x 15' (2-2/8 IF threads)  POR

(Ref#1427Tc)  800' of 3" x 20' bottleneck drill pipe (2-3/8 IF)  POR

(Ref#2780Ta)  3000' of 3" x 10' drill pipe, excellent condition (some are new)  POR

(Ref#3279Tb)  2000' of 2-7/8" x 20' drill pipe POR

(Ref#247T)  28 jts of 2-7/8" x 20' drill pipe (flats on both ends – some also have 15')  POR

(Ref#671Nb)  70 joints (1,400') of 2-7/8" x 20' bottleneck drill pipe  Price:  $300 per joint

(Ref#12777Td)  2000' of 2-7/8" “new" bottleneck drill pipe  POR

(Ref#15180Ta)  540' of 2-7/8" x 20' drill pipe with 2-3/8" Mayhew Reg POR
(Ref#15180Tb)  1 JT of 2-7/8" X 10' drill pipe with  2-3/8" Mayhew Reg POR
(Ref#15180Tc)  3 jts of 2-7/8" x 15' drill pipe with 2-3/8 IF pin box with flats POR

(Ref#1338Tc)  800' of 2-7/8" x 20' pipe, flatbed pipe truck

(Ref#4447T)  100' of 2-7/8" x 20' Mayhew regular drill pipe, breakout lugs, good condition POR

(Ref#5493Tb)  500' of 20' (2-7/8" IF) drill pipe used on Mayhew and Midway rigs  POR

(Ref#5493ta)  400' of 15' (2-3/8" IF) drill pipe used on Mayhew and Midway rigs  POR

(Ref#9782Tb)  30 jts of 2-7/8" x 15' drill pipe (2-3/8IF) with flats and lugs  POR

(Ref#2302T)  2-7/8” x 15’ Drill pipe with 2-3/8 IF, 3” too  joints, approx. 300’ (100’ brand new,200’ average condition)  POR

(Ref#8672Tc)  2-7/8" x 15' pipe POR

(Ref#11476T)  200' of 2-7/8" x 15' IF , 2 drill collar  POR

 (Ref#14051N)  400' of 2-1/2" x 20' drill pipe (brand new)

(Ref#3812Rd)  800' of 2-3/8" x 20' pipe  Price:  $5,000

(Ref#8422R)  360' of 2-3/8" x 20' rod  POR

(Ref#10046T)  200' of 2-3/8" x 20' pipe

(Ref#9199T)  1000' of 2-3/8" x 20' drill pipe, good condtion POR

(Ref#5175Tb)  500' of 2-3/8" x 20' FEDB pipe (brand new)  POR

(Ref#3659Tb)  1100' of 2-7/8" x 30' flush joint drill pipe with breakout flates  POR

(Ref#5179T)  200' of 3-1/2" x 5' flush joint drill pipe (2-3/8 IF thread)  POR

(Ref#2181Rb)  (15) 6" x approx. 29'L drill collars, wrench flants on pin end  POR

(Ref#2191Rc)  (3) 8" x approx. 15' L drill collars  POR

Ref#2181Rd)  BJ type B tongs w/jaws for 5" – 6-3/4", 6-5/8 – 9", 9" – 10-3/4"  POR

(Ref#7363NB) (4 available) 15' drill collars  POR

(Ref#1475NH)  7 available, 4 1/2 Drill collars  POR

(Ref#10681Te)  (6) 6-1/4" drill collars, (1) 12" drill collar

7 ROD CAROUSEL FOR INGERSOLL RAND TH60  (Ref#10859Rb) For 4.5" x 20' rod  Price:  $6,000 USD

7 ROD CAROUSEL FOR VERSADRILL  (Ref#5594Tc)  POR

HAMMERS/TOOLING  (Ref#10275Rc)
IR QL50 with bit, Numa 6", adapters, IR QL4 hammer, IR 16 hammer, IR WL50 hammer, QL60 bits, IR 360, WL50, T4 rig parts, lifting plugs, IR 380, IR 360, Wildem M15 mud pump, and more (see file) 

 

(Ref#5384RB)
10" Symmetrix W system, brand new, never used
8" Symmetrix W system, brand new, never used
Ingersoll Rand 6" QL60 hammer, low hours
Ingersoll Rand 8" QL80 hammer, with 10" Holte Mfg URG casing hammer system
POR

 

(Ref#6974NC)  Various bits – 12 1/4", 11", 9 7/8", 6 ¾" All brand new & never used  POR

(Ref#15413RB) Tools for cable tool rig – fishing tools, sockets, stems, bits, bailers,  etc - Arizona

BIG DIAMETER AIR DRILLING SYSTEM  (Ref#14132R)
“Like New" condition – only 100' drilled.  Purchased in 2013.  Includes:
18" MG180 hammer (made in USA)
30" bit – only drilled 60'
20" bit
20" OD shroud (top operate 30" bit)
20" x 10' lead ballast rod
16" x 10' rod
Total length of system is 40'
Package Price  $75,000

INGERSOLL RAND CD 36-5 CLUSTER DRILL HOUSING  (Ref#4775Ra)
Uses 5 IR 380 series hammers or equivalent 8" diameter (not included), comes with 5 top subs, 8" BECO box & pin, currently set up for raise bore or for standard drilling, comes with shop/storage skid,
Minimum diameter             36"  (with (5) 8" hammers and (5) 8 7/8" hammer bits, less hammer could be used
Maximum diameter            40"
OD of cam                            34 1/2"
Requirement CFM & PSI
            Low                2250 CFM – 125 PSI
            Medium         3250 CFM – 175 PSI
            High               4250 CFM – 225 PSI
Hammer are connected to cam with “0" rings and top nut.  Air is fed to hammer through channel.
good condition.
24" cluster drill  (ref#4775Rb)
Price:  $17,500

19" DOWNHOLE HAMMER MODEL QL200 (Ref#3030Nb) with 19" & 24" bits  Price:  $94,500

INGERSOLL RAND 112, 12" HAMMER (Ref#4680Na)
Mission 12" hammer  (Ref# 4680Nb)

(11500Rb) 12" Mission hammer, 6" Mission hammer  POR

(Ref#14564Rb) Mission 6" hammer with float valve  Make Offer

8" Ingersoll Rand hammer with 12' fluted stabilizer and 9-7/8" bit (Ref#302Nb) Price:  $8,500

(Ref#5548N) TRW Down the Hole Hammer, brand new, never used, model SD4  POR
Also available: 2 joints of 2 3/8" pipe & 4 1/2" button bit

(Ref#12896RB) remanufactured 6 1/4" bits (1) available (not used since reman), and (1) 12" bit  POR

SUPER VULCAN PILE AIR HAMMER #30C KEYED HAMMER  (Ref#11656Ta)  Price:  $14,750

BOX HANDING SET OFLEADS FOR PILE DRIVING  (Ref#11656Tc)  58' length (3 sections top 30', middle 10', bottom 18'), 26" depth, 20-1/2" inside to iside of rail (between the guide), straight leds which bolt together, no ladder,  Price:  $11,500

EDM 10" AIR HAMMER (Ref#8767Rb)  with casing driver foot with 10" bit, never used  POR

TIGER TIERRA AARDVARK CASING HAMMERS (Ref#9044Nc) 2 available  Price:  $12,500 each

TIGER TIERRA 612 CASING HAMMER  (Ref#1985Ta), located Canada  POR

WELDCO BEALES 412V CASING HAMMER  (Ref#14496Ta)  POR

WELDCO BEALES 1321  (Ref#14496Tb)  needs discharge head  Price:  $17,500

WELLEN CASING HAMMER  (Ref#14496Tc)  older version of the Weldco Beales 1321  Price:  $10,000

WELLEN CASING HAMMER  (Ref#9887T)  Removed from T64, approx. 6" x 2', 2' depth  Price:  $5,000

AARDVARK 2221 AIR HAMMER  (Ref#8540T)  Price:  $19,500

FOREMOST DR24  18" DISCHARGE SWIVEL  (Ref#3072Ra)   manufactured 2005, used very little and in top condition  Price:  $20,000

GEOLOOP 50-500 GROUTER  (Ref#10438T)  Honda gas engine Price:  $23,000

GEO-LOOP 50-500  (Ref#5594Ta)  Mid set hose reel  Price:  $18,500

GEOLOOP 50-500 GROUTER  (Ref#9318T)  trailer mounted, diesel engine, hose reel  Price:  $52,500

GEO-LOOP HOSE REEL  (Ref#15148T)  Brand new, never used  Price on Request

GEO-LOOP 40-500 GROUT PUMP (Ref#9753R)  Manufactured 2010, engine removed, Geo-Loop mid-set hose reel with swivel base, mounted on tandem axle trailer  Price on Request

GEOLOOP 40/50 AND 50/50 GROUP PUMPS  (Ref#14454Tb)  hydraulic mid set reel and loop reel and trailer  Price:  $30,000

GEOLOOP 40-50 GROUT PUMP  (Ref#12914Ta)  Grout machine, Geoloop mid set hydraulic reel, Geoloop reel holder, rebuilt engine to be installed  Price:  $14,500

GEOLOOP 40-500 GROUTER  (Ref#6267T)  Honda 670 gas engine, dual piston, hose reel, water transfer pump  Price:  $27,500

GEOLOOP GROUTER  (Ref#8809Lm)  Manufactured 2005, 50-500 grouter, Cummins 4 cylinder engine, 4050 hours, Rice 20k lb trailer  Price:  $40,000

GEO-LOOP 20-320 GROUTER  (Ref#11527T)  Honda motor, water tank, toolboxes mounted on tandem trailer  Price:  $15,850

GEOLOOP MIGHTY GROUT MODEL 20-320 GROUTER  (Ref#7501Ta)  Honda engine, throttle control  Price:  $16,000

GEOLOOP GROUTER MODEL 50-500  (Ref#11369Ta)  Manufactured 2012, only 60 hours, Honda gas engine, Halliburton water meter, hose reel, stored inside  Price:  $24,500

GROUND HOG GHG-212CE GROUT TRAILER  (Ref#10003T)  , manufactured 2010, GeoLoop 500 reel, 500' Kyle poly pipe reel, 300 gallon water tank, (2) 300' 1-1/4" Geothermal loops, trailer in good condition  Price:  $33,000

GROUNDHOG GHG 212CE GROUT PUMP  (Ref#3402T)  Year 2004 (used for 2 jobs – approx. 16 hours), 11hp Honda engine, electric start, 41 gal mixing hopper, 32 gal pumping hopper, low hours  POR

GROUNDHOG GROUTER  (Ref#5261T)  Like new, very low hours  Price:  $12,500 USD

GEOLOOP 550 CONCRETE PUMP  (Ref#9845Tc)  Price:  $24,500

GEOLOOP EZ LOADER 6000  (Ref#14201T)  4' x 7-1/2' opening, roll off tarp, holds 6000 lbs, year of build approx. 206  Price:  $8,500

GEOLOOP 50-500 TANK  (Ref#15184Ta)  Price:  $1,000

GEOLOOP HYD POWERED REEL  (Ref#15184Tb)  Price:  $8,000

CHEMGROUT MODEL CG625 COLLOIDAL MIXER  (Ref#9899R)  Deutz F2L511 air cooled engine two cylinder with 12 volt electric start, centfigual slurry pump Model G1387, 2 x 3 x 12 Krough pump, grout pump Model 2J6 CDQ open throat, both pump rebuilt    PRICE:  $32,500

CHEMGROUT 620 17CF GROUT PLANT  (Ref#5214Tb)  Like new condition  Price:  $14,000

CHEM-GROUT CF-500GH  (Ref#2886T)  16 hp gas engine, double drum paddle mixers  Price:  $21,500

CHEMGROUT GROUTER  (Ref#13757T)  3 available, electric motors, 460 Vac, 60HZ, 3 Phase, 480 volts, progressive cavity pump, electric over hydraulics  Price:  $9,500 each

HEAVY DUTY DECON TRAILER (Ref#5638T) with wash rack, 4000 psi pressure washer, Ghemgrout cement mixer, 100 gallon water tank  Price:  $26,500

CHEMGROUT MIXER  (Ref#1736Nb)  POR

CHEM GROUT GROUT PLANT  (Ref#8806T)  Price:  $52,000

1976 GMC TANDEM AXLE 2000 GALLON WATER TRUCK  (Ref#9285Rb), 366 Chevy gas engine with Chemgrout 550 grouter  Price:  $21,500

ROSEWALL GROUT PUMP  (Ref#7217Tb)   Manufactured 1992, 500 gallon capacity, 9 hp Honda gas engine, mounted on tandem axle trailer  Price:  $13,500

HYDRAULIC GROUT PUMP  (Ref#4620Tb)  Armstrong 5 x 6 piston pump, designed to pump 60 gpm, all hydraulic, variable speed, 95 gpm fresh water pump  Price:  $11,500

HUTTE JET GROUT MAST SYSTEM (ref#12533TV). Year 2010, Fits 2010 HBR504 drill rig. 3 each 4m mast extensions, Rotating jaws not included  Price:  $45,000

RUPE GROUTER  (Ref#2042Tb)  Honda gas engine, hose reel, double hopper, trailer mounted  POR

GROUT TRAILER WITH CONTINENTAL PROGRESSIGN CAVITY GROUTER  (Ref#11707Tb)  Ford inline 300 gas deck engine, hydraulic mixer, hyd hose reel, shop built  Price:  $15,500

7-1/2 x 10 HYDRAULIC PUMP  (Ref#9099)  New, Never Used, 7-1/2" liner and piston, FC Standard and valve seat, Dimensions/weight:   84" long x 36" high  (62" high with surge chambers) x 31" wide, Weight:  1,000 lbs., Capacity with 4" hydraulic cylinder the pump will pump 266 gpm and requires a hydraulic power pack with 65 gpm capacity.  It will lift up to 28' from a tank and it will discharge material up to 5000' and greater.  This pump will pump material such as:  oil and sludge, water, rust and material from the tank. POR

GROUTMASTER GROUT PUMP (Ref#9044Nd) with mixing tub  Price:  $15,000

 

GROUTMASTER GROUT PUMP  (Ref#10132R)  18 hp motor, ready to work  POR

BOUNDRY WATER GROUT MACHINE  (Ref#1510Nb)  trailer mounted, 1980's, powered by twin disc Briggs and Stratton engine, all hydraulic, slide up and down  

GROUTER   (Ref#3120ND)  Price:  $9,500

GROUTER  (Ref#2063Te)  Two tubs, paddle mixer, 3L6 Mono, 4 cyl gas motor  Price:  $9,500

PUTZMEISTER BSA 1002D CONCRETE PUMP  (Ref#7870Td)  Manufactured 2003, no hour info but in good working condition  Price:  $35,000 USD

PROALL MODEL P10550 MOBILE CEMENT MIXER  (Ref#1787T)  Built 2020, brand new, never been used, John Deere engine, munted on tri axle trailer  Price:  $315,000

1982 AUTOCAR CEMENT TRUCK  (Ref#6313Te)  10 yard Zim cement truck, Eaton 10 speed tansmission, Cat 3406 engine, used for plugging wells  Price:  $33,500

CEMENTECH IMM-60 VOLUMETRIC CEMENT TRUCK  (Ref#8581T)  Manufactured 2014, 10 yard, munted on 2007 Sterling truck with Mercedes engine, computerized, ticket printer, currently working  Price:  $162,500

JACK UP DRILLING/CORING RIG  (Ref#9587)  operates in 80' of water, composed of (6) 10' x 40' x 7'H FlexiFloats and (4) 10' x 20' x 7' H Flexifloats, (4) spuds, (4) 80' legs 3' dia x 40' long.  Currently on the platform is a Gardner Denver mud rig used for drilling and core samples.  Another type of rig such as a Mobile, Acker or CME could be placed on jack up.  Currently working.  Offered on rental basis:   $40,000 per month.   Will sell for $1,100,000

MISC DRILL EQUIPMENT (Ref#7670N)
Drawworks
Engine
Top of mast
Swivel, sheaves
Price: $27,000 for the lot - Located West Texas.

CUSTOM BUILT CRANE/HYDROFRAC UNIT  (Ref#3312Nf)  Mounted on 1991 International (converted school bus), 12,000# Marvin Harrington 4wd conversion DT 466 pre electronic, 4 speed Allison automatic transmission, 10,000# National crane, 30,000# Tulsa hydraulic driven (4 speed) frack unit, 6 cyl Perkins diesel, pump is 2,500 psi plunger pump (triplex), 150 gal per minute, custom built in 2005  Price:  $45,000 (12' county road plow availble for additional cost.)

GEOTECHNICAL TESTING MICRO-DEVAL TESTING MACHINE  (Ref#806T)  Brand New, Still in Crate.  The Micro Deval Testing Machine used to determine the resistance of wear for 25-50mm size aggregates. The machine consists of a steel frame, four stainless steel cylinders, and 25kg of 10 mm diameter stainless steel spheres.  Fitted with an automatic digital counter that allows the machine to stop automatically at preset number of revolutions. Stainless steel 200x 154 drums rotates at speed of 100 (±5) r.p.m  Price:  $10,500

2003 ALLMAND MITE-ELIGHT TOWER  (Ref#15419Te) 4 bulbs, 1.2L Kubota engine  POR

1986 255 HP CUMMINS TEST (Ref#15419Tf)  mounted on tandem axle trailer, includes drive line with guards and 1:1 gear head, and one 3:2 gear head  POR