HELPING YOU DRILL BETTER
constant hammer shank to suit RE054 sandvik RC Hammer
constant hammer shank to suit RE054 sandvik RC Hammer
constant hammer shank
Constant hammer shanks or "Rattler bits" are used in a hammer in place of a standard drill bit and allow the piston to continuously cycle when the air is turned on. They are typically used when a hammer and drill string is bogged to rattle the drill string.
constant hammer shank | |
RE054 RC Hammer | |
Part Number | Thread |
ROS05200R35 | Remet 3-1/2" |
ROS05200M4 | Metzke 4" |
ROS05200R4 | Remet 4" |
ROS05200R45 | Remet 4-1/2" |
ROS05200M45 | Metzke 4-1/2" |
Copyright © ROSCHEN GROUP LIMITED All rights reserved..All Rights Reserved 沪ICP备17048094号-1