High-Performance 20 Inch IADC 517 TCI Tricone Drill Bits
High-Performance 20 Inch Tricone Drill Bit with Sealed Bearings and Diamond Gauge Protection
Durable 20 Inch API Standard Tricone Drill Bits for High-Pressure Drilling Operations
High-Performance 20 Inch API Standard Tricone Drill Bits for Oil and Gas Extraction
Customized 20 Inch API Standard Tricone Drill Bits for Your Specific Drilling Needs
API Standard 20 Inch TCI Tricone Drill Bit for Deep Drilling in Any Formation
Api Standard 20 Inch IADC 517 Tci Tricone Bits
20 inch Reverse Circulation Tricone Drill Bit IADC517/537 Rock Drill Bit for Well Drilling
1. Premium 20 Inch API Standard TCI Tricone Bits for Drilling
2. High-Performance 20 Inch IADC 517 TCI Tricone Drill Bits
3. Durable 20 Inch API Standard Tricone Bits for Oil and Gas
The Advantages of Using a Tri Cone Over Other Drill Bits
1) There is a Tri Cone suitable for any rock formation
2) Tricone bit is versatile and can handle changing formations
3) Tri Cones are reasonably priced, long lasting and have an efficient drilling rate
4) Tricone is that the roller cones have high end sealed bearings; extremely high quality tungsten carbide and diamond gauge protection throughout the drill bit as well as skirt tail hard facing and optimized hydraulics. These roller cone drill bits are designed to go to extreme depths in extreme conditions and in situations where they cannot fail.
Specifications
Tricone Bits Specifications | |||
Regular Sizes | Regular IADC | API Reg Pin | Make-up Torque(N.m) |
3 7/8"(98.4mm) | 126/216/517/537/637 | 2 3/8 | 4100~4700 |
4 5/8"(117.4mm) | 126/216/517/537/637 | 2 7/8 | 6100~7500 |
5 1/2"(139.7mm) | 126/216/517/537/617/637 | 3 1/2 | 9500~12200 |
5 5/8"(142.8mm) | 126/216/517/537/617/637 | 3 1/2 | 9500~12200 |
5 7/8"(149.2mm) | 126/216/517/537/617/637 | 3 1/2 | 9500~12200 |
6"(152.4mm) | 126/127/216/517/537/617/637 | 3 1/2 | 9500~12200 |
6 1/4"(158.7mm) | 126/127/216/517/537/617/637 | 3 1/2 | 9500~12200 |
6 1/2"(165mm) | 126/127/216/517/537/617/637 | 3 1/2 | 9500~12200 |
7 1/2"(190mm) | 126/216/517/537/637 | 4 1/2 | 16300~21700 |
7 5/8"(193mm) | 126/216/517/537/637 | 4 1/2 | 16300~21700 |
7 7/8"(200mm) | 126/216/517/537/637 | 4 1/2 | 16300~21700 |
8 1/2"(215.9mm) | 117/127/217/437/517/537/617/637 | 4 1/2 | 16300~21700 |
9 1/2"(241.3mm) | 117/127/217/437/517/537/617/637 | 6 5/8 | 38000~43400 |
9 7/8"(250.8mm) | 117/127/217/437/517/537/617/637 | 6 5/8 | 38000~43400 |
10 5/8(269.8mm) | 117/127/137/217/517/537/617/637 | 6 5/8 | 38000~43400 |
11 5/8(295.3mm) | 117/127/137/217/517/537/617/637 | 6 5/8 | 38000~43400 |
12 1/4"(311.1mm) | 114/127/217/437/517/537/617/637 | 6 5/8 | 38000~43400 |
13 5/8"(346.0mm) | 127/217/517/537/617/637/737/837 | 6 5/8 | 38000~43400 |
14 3/4"(374.6mm) | 127/217/517/537/617/637/737/837 | 7 5/8 | 46100~54200 |
17 1/2"(444.5mm) | 114/115/125/215/515/535/537/615/635 | 7 5/8 | 46100~54200 |
20''(508.0mm) | 114/115/125/215/515/535/537/615 | 7 5/8 | 46100~54200 |
22''(558.8mm) | 114/115/125/215/515/535/537/615 | 7 5/8 | 46100~54200 |
24''(609.6mm) | 114/115/125/215/515/535/537/615 | 7 5/8 | 46100~54200 |
26"(660.4mm) | 114/115/125/215/515/535/537/615 | 7 5/8 | 46100~54200 |
Tricone Drill Bits Technical Specifications | ||||
IADC code |
Applicable Formation | Main characteristics of the bit | Recommended parameters | |
Cutting structure | Normal WOB kN/mm (bit dia.) |
Rotary speed (rpm) |
||
517 | Soft formations with low compressive strength and high drillability, such as shale, clay, rock salt, soft limestone, etc. | Large radius scoop compacts in inner row, wedge compacts in outer row, inequable spaced compacts arrangement, and a row of trimmers is added between gage row and heel row | 0.50~1.05 | 220~40 |
IADC | WOB(kn/mm) | RPM | Applicable Formations |
(bit diameter) | (r/min) | ||
117 | 0.35-0.8 | 240-80 | Very soft fromations with low compressive strength and high drillability, such as clay, mudstone, chalk, etc. |
127 | 0.35-0.9 | 240-70 | Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft shales, soft limestone, etc. |
437 447 | 0.35-0.9 | 240-70 | Very soft formations with low compressive strength and high drillability, such as clay, mudstone, chalk, gypsum, salt, soft shale, soft limestone, etc. |
517 527 | 0.35-1.0 | 220-60 | Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt shale, soft limestone, etc. |
537 547 | 0.45-1.0 | 220-50 | Soft to medium formations with low compressive strength, such as medium soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc. |
617 627 | 0.45-1.1 | 220-50 | Medium hard formations with high compressive strength, such as hard shales, limestone, sandstone, dolomite, etc. |
637 | 0.5-1.1 | 180-40 | Hard formations with high compressive strength, such as sandstone, limestone, dolomite, hard gypsum, marble, etc. |
All advantage extend bit work life
The tricone drill bit is the most popular drilling bit in the world,it can be widely used for Oil&Gas Drilling,Mining,Water Well,Geological Exploration areas.Our tricone bit divideds into metal sealed drill bit and rubber sealed bit.
1. The C-Center jet can avoid the formation of a ball in the bit, eliminate the fluid area at the bottom of the well, accelerate the upward flow of drilling cuttings and improve ROP.
2. High saturation NBR bearings can reduce sealing pressure and improve sealing reliability.
3. The G-Gauge protection improves the measuring ability and prolongs the service life of the bit.
4. Adding a row of teeth between the rear taper and the outflow to trim the borehole and protect the cone.
Premium TCI Tricone Bits
20 Inch Drilling Bits
API Standard Bits
High-Quality TCI Tricone Bits
Premium Drilling TCI Bits
Performance-Driven TCI Bits
Enhanced Performance Tricone Bits
High-Efficiency 20 Inch Bits
Long-Lasting TCI Tricone Bits
Precision Engineered TCI Bits
Reverse Circulation Drilling
Tricone Drill Bit Drilling
Rock Drill Bit Drilling
High-Performance Tricone Drill Bit
Heavy-Duty Reverse Circulation Bit
Cost-Effective Reverse Circulation Bits
Field-Tested Reverse Circulation Bits
Performance-Driven Tricone Drill Bit
Cost-Efficient Reverse Circulation Drill
Field-Proven Reverse Circulation Bits
FAQ:
1.Q: Is your company a distributor or a manufacturer?
A: Manufacturer, We are a 100% real factory of Rock Drill Bits, with 30 years' experience. And We have passed the factory audit by SGS.
2.Q: How about your products?
A : Both standardized tricone bits and PDC bits produced strictly according to API and rock bits-customizing used in various construction works are provided.
3.Q: What kind of packing do you have?
A: Ply Wooden boxes (free of fumigation); Cartons; Packing can be customized.
4.Q: What is your price advantage?
A: We are 100% factory directly sales,API production process guarantee,Provide customized services for brand processing.
Reduce the cost of drilling for you, worry free after-sales service. Welcome to book a video-call to inspect our factory.
Tricone Bit IADC517/537 Rock Drill Bit for Well Drilling
5.Q: What is the minimum order quantity for your factory?
A:It all depends. Generally 1-5 pcs.
6.Q: What is the website about your factory?
A: www.roschen.com ; www.roschen.net
Best regards,
Phiger Leo
Direct Line: 0086-137-6419 5009
WeChat/WhatsApp:: +86-137-6419 5009
================================================================
ROSCHEN@ INC.
ROSCHEN@ GROUP LIMITED
ROBERT ROSCHEN@ LIMITED
ROSCHEN@ HOLDINGS LIMITED
HEFEI ROSCHEN@ TOOL CO., LTD.
ROSCHEN@ GEOLOGICAL TOOL CO.,LTD.
SHANGHAI ROSCHEN@ INTERNATIONAL CO., LTD.
ROSCHEN@ GEOLOGICAL INSTRUMENTS CO., LTD.
EMAIL: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschendrill.com
http://www.roschenmining.com
http://www.roschendrilling.com
http://www.explorationcoredrilling.com
http://www.roschen.net
http://www.roschen.cn
http://www.roschen.com
https://www.drillpipefactory.com
================================================================